George
Graves - Candlestick and Bowl
Denis
Muras - Cedar Creche and Chess Pieces
Chris Farquhar - My project is call "Bread and Cheese", not sure why it's called that, except that it rhymes with two birds in a tree. The design came from the Scrollsaw Woodworking & Crafts magazine; Winter 2020 - issue 81; by: Fiona Kingdon. I made it out of Pine, using a 0/2 spiral blade, painted with Acrylic paints by my wife Linda.
Roy
Quast - Puzzle Fish and Deer
Dave
VanDewerker - Wolf and Butterflies
Tom
Paulley - The box is made from offcuts from a 3-D cutting board. The
wood species are cherry, maple, walnut and purpleheart. I used a
forstner bit to hog out most of the material, then used a chisel and
router template bit to clean up the inside of the box. The lid is held
in place by 3 pairs of rare earth magnets. The finish is Total Boat
Halcyon, a water-based marine varnish that comes in a bag, not a can!
Used two coats of Gloss, followed by one coat of Satin. 
Steve Wavro brought in an Intarsia Moose, which was
based on a design by Bruce Worthington. It is comprised of 50 individual
pieces of Ebony, Maple, Poplar, Walnut, and Western Red Cedar and
finished with 1 coat of Danish Oil and 4 coats of polycrylic.
Mike
Turner - Sofa Tables
Toys
brought in by members as part of the "Toy Challenge"
Lon
Kelley - Mesquite Table and Bowl
Mike Hardy - Two music stands. The first one is a commission in
mahogany. The engraving is the first two measures of the Mozart Clarinet
Concerto and was cut with a trim router. The second stand is cherry. The
cutout is done with a scroll saw, a modelers’ rasp, and files. Both are
finished with Waterlox.