E-Mail the Woodworker's Club of Houston to post your ad:
(Please, only woodworking related items)
(Postings will be removed after 90 days)
Posted February 28, 2010
FOR SALE:
SOLID RED OAK DISPLAY CASE.
THIS CASE WAS ORIGINALLY USED AT A VERY LARGE FLIGHT SCHOOL TO HOUSE THE KEYS TO SCHOOL AIRCRAFT. MEASUREMENTS ARE 39 WIDE X 21 HIGH BY 4 DEEP. FOUR HINGED DOORS ARE RED OAKED FRAMED WITH Ό GLASS TO VIEW KEYS. A VERY LIGHT STAIN WITH TUNG OIL FINISH MAKES THIS PIECE STAND OUT. THIS PIECE WOULD BE PERFECT TO BE USED AS A DISPLAY CASE FOR MILITARY MEDALS, PLATES ETC. PHOTOS AVAILABLE UPON REQUEST. $300 .00 USD
CAPTAINS CHAIR:
ETHAN ALLEN SOLID MAPLE LOW-BACK CAPTAINS CHAIR, NATURAL FINISH. THIS CHAIR HAS 1 BROKEN SPOKE BUT CAN BE EASILY REPAIRED. $40.00 USD.
TURNING TOOLS;
INTRODUCTORY STYLE SEARS BRAND TURNING TOOLS, NEVER BEEN USED., $2.00 USD PER TOOL.
JOINTECH FENCE AND GUIDE SYSTEM.
A JOINTECH FENCE AND GUIDE SYSTEM, 15 YEARS OLD, NEVER USED, STILL IN ORIGINAL BOXES. $20.00 USD
WOOD BLOCKS:
I HAVE 4 SOLID BLOCKS OF COCOBOLO, @ 9 X 4 X 3 GREAT FOR TURNING, $15.00 USD EACH. ALL BLOCKS ARE COMPLETELY WAXED.
LUMBER:
I HAVE VARIOUS BOARDS OF SEVERAL SPECIES, BOTH DOMESTIC AND EXOTIC. ONE BOARD IS 8 X @ 3 X Ό OF A VERY NICE PIECE OF BIRDS EYE MAPLE. PRICE IS $2.00 USD PER BOARD FOOT.
VENEER:
MANY FLITCHES OF RAW VENEER , MOSTLY EXOTIC, SOME DOMESTIC. THESE FLITCHES CONTAIN @ 10-15 SHEETS OF SIZES RANGING FROM 4-5 LONG X 2-3 WIDE X Ό - 1/8. FOR THOSE OF YOU OUT THERE WHO WORK WITH VENEER THIS IS A TREASURE CHEST OF A FIND! WOULD LIKE TO SELL ENTIRE LOT, HOWEVER, SPECIFIC FLITCHES WILL BE SOLD SEPARATELY. SINGLE SHEETS ARE NOT FOR SALE. @300.00 USD FOR ENTIRE LOT, OR 50 USD PER FLITCH.
CONTACT WILLIAM GUTIERREZ
CELL: 832-247-6661
Posted February 3, 2010
ESTATE SALE:
For RUDY LIPPERT (long time WWCH member) to be held February 11th, 12th, and 13th from 9 am to 4 pm.
INCLUDES his wood working tools and power tools.
For more information contact Bryan Davis at 713-398-1114 or
email jbdestatesales@gmail.com.
You
can also view this sale with pictures by clicking on this internet link: http://www.estatesales.net/estate-sales/94296.aspx
Posted January 23, 2010
My woodworking days are over. Im moving into a high rise.
Forty years of accumulated woodworking tools and debris will disappear into an estate sale.
There are a several items that I want to offer outside of the sale:
A complete set of Fine Woodworking Magazine. Issues 1 through 209. Mint condition. $175.
A complete set of Woodwork Magazine. Issues 1 through 114 (its last publication before it folded). Mint condition. $50.
A Phoenix Clock Kit. These went out of production years ago. Anyone want one helluva project?
If completed, it should look something like this: http://books.google.com/books?id=YOQDAAAAMBAJ&pg=PA109&lpg=PA109&dq=phoenix+clock+kit&source=bl&ots=9FdfymOr5f&sig=_jJe7cXJhZmDAm7Ti5t8YZAQVwE&hl=en&ei=k8VIS86iDIy0tgeJ-KzkDQ&sa=X&oi=book_result&ct=result&resnum=1&ved=0CAwQ6AEwAA#v=onepage&q=phoenix%20clock%20kit&f=false $75.
The worlds oldest Shopsmith with attachments. Dating from around 1950.
Still my favorite power tool. $150.
Rudy Lippert
281-558-1673
Posted December 27, 2009
FOR SALE:
I'm doing some early Spring cleaning and need to see if anyone is interested in these items.
Thanks! Jim Glock
Item 1: Tormex Planer/Jointer Sharpening Jig. Used very little and in excellent shape.
List $165.00 asking $75.00
Item 2: 1/2" Shaft Carbide Router Bits.
Asking $100.00 for the 7 piece set
Located in Deer Park
Posted December 7, 2009
FOR SALE:
3-Form decorative acrylic panels $5.00 Square foot
#1 as seen in photo lower left
½" thick
2-23 1/2x42 ½
1-12x42
#2 as seen in photo left middle
½" thick
1-120x20 1 corner cut off at 45
1-15x42
3-11x48
1-10 1/2x48
2-8 1/2x42
#3 as seen in photo top left
½" thick
1-48x22
1-95x38 w/ large cut out I side in middle
1-96x19 w/ large cut out I side in middle
#4 right as seen in photo
1/8" thick corrugated some of this material has paper facing that will be hard to remove
94x18, 45x35, 32x45,6-11x96
Cabinet
shop closing after 35 years supplies as above plus more including hardware
--
BOB THOMASON
THOMASON CABINET INC.
shop 281-309-9200
cell 713-408-1140
bobthomason@gmail.com
www.thomasoncabinetinc.com
Posted December 1, 2009
FOR SALE:
My neighbor, Phyllis Ferguson (phylferguson@sbcglobal.net), has a light table for sale in excellent condition.
It is standard size, 48" across, 36" high, and 36" deep with a solid oak base.
She'd like to sell the lamp and drafting chair, (also excellent condition), all three pieces, for $1500.

Hank Merry, WWCH Member
Posted December 1, 2009
MOVING OUT OF TOWN SALE:
Tools for Sale (all bought new - original owner):
Jet 10" JWTS-10CW Contractor Table saw - has Jointech Saw Train with 48" phenolic table installed and
Jointech cabinet maker fence/positioning system, but can be sold with the original 46" table & X-ACTA fence.
$600 with original table & fence or $1,200 with Jointech system including manuals, router bits, fence, etc.
Table saw mobile base - $135
Delta 14-650 Hollow Chisel Mortiser with Ό" & 3/8" Mortise & chisel bits - $200 for all
Delta 23-710 Wet Sharpening Center - $125 ($220 new)
Delta Professional 10" Radial Arm Saw $600 ($1,500 new)
Grizzly 2hp Dust Collector with ducts, connectors, & blast gates - $225 for all
8" benchtop drill press with Delta Oscillating Drum Sander attachment - $60 for all
Craftsman 3.5 hp 25 gallon air compressor (8.5 cfm @ 40psi; 6.8cfm @ 90psi) - $150
8' shop-built cabinet/workbench with full-suspension ball bearing drawers - $175
Wood for sale:
(rough sawn air-dried 5+ years, many 1" thick wide planks):
Pecan - $2.75/bf
Magnolia $2.00/bf (some spalted $ 2.50bf)
Cypress - $1.75 bf
Yellow Pine - $1.25/bf
Aromatic Red Cedar - $2.00 bf
"Wood Magazine" collection (approximately 1997 to 2007) plus miscellaneous other woodworking magazines- $100 for all
Contact:
Tom Chadwell
Phone: 281-970-5048
Posted October 31, 2009
I
am a past member of WWCH and I want to offer for free to any member
in need of a portable flat sturdy wood rack.
I
currently have it listed on craig's list for money but I'll give it FREE to a
member.
Joe Runcer
http://www.flickr.com/photos/xepdjr/sets/72157622191679524/
--